How To Protect Floors During A Renovation

Floors take more damage during a renovation than the walls do. Ladders get dragged, paint cans get dropped, and a few grains of grit under a boot will scratch a hardwood finish. Good Floor Protection costs far less than refinishing or replacing a floor.

Floor Protection

Match the cover to the floor and the job. Hardwood and laminate need something breathable that won’t trap moisture. Heavy paper board or builder’s paper works for light trades like painting. Film that sticks to itself instead of the floor is a safer pick for finished wood than anything with adhesive on the underside. Self-adhesive films are made for tile, vinyl, sealed concrete and carpet, but follow the maker’s limits on how long they can stay down, because adhesive and sunlight can mark a floor if the film sits for weeks. Where you’ll roll equipment, add corrugated plastic sheets or hardboard on top, since paper tears under wheels.

Tape is where most floors get hurt. Don’t put strong tape directly on a finished floor. Tape the protection to itself at the seams, use low-tack painter’s tape at the edges if you have to touch the floor, and test a hidden spot first.

Traffic matters, so plan the paths. A Floor protection runner is a narrow roll laid along the route workers use every day, from the front door to the work area. It saves you from covering every square foot of a house, and it keeps the walking path from getting scuffed up. Make sure it lies flat and the seams are taped, because a curled edge is a trip hazard. Replace it when it’s torn or gritty, since dirt trapped under the cover scratches a floor just like dirt on the bare surface.

A few more habits:

●     Sweep or vacuum before you lay anything down.

●     Overlap seams by a few inches and tape them.

●     Lift a corner and check the floor every few days on long jobs.

●     Keep covers dry, because a wet cover on a wood floor can stain it.

Pull the protection up as soon as the messy work ends, and inspect the floor before the final clean. If something got damaged, a photo taken that day makes the conversation with the client or the contractor much simpler. Keep a few spare sheets on site too, since patching a torn section mid-job is easier than hunting for supplies at the last minute.

Comments

Popular posts from this blog

Floor Protection: To Avoid Expensive Repairs

The Value of Carpet Elevating Interior Spaces

Hardwood Floor Protectors from Everyday Wear and Tear